|
About Us
Furniture Categories
Term & Conditions
Contact Us
Article
 ↑ Grab this Headline Animator
|
Carpenter workbench and perusut
Carpenter workbench becomes very
important when we do manual work as a continuation of the work machine.
However, some machine work remains to be done manually. Especially for the
manufacture of wooden furniture that limited amounts. For traditional
carpenters in Indonesia, workbench classic is used as a bench model of the
position holder tilted from back to front. There is a kind of stopper on the
front bench of a very functional at the time of harvest manually.
Thickness workbench holder is made of at least 3 cm in order to clamp a work
piece binding and not easily bent. The slope of this workbench to help
increase the driving force at the time of harvest or groove side, while the
stopper at the front to help hold the work piece in place. Other workbench
has a model such as a table with the addition of other functions. Height,
width and length are almost equal to the normal working table (approximately
160 x 80 x 74cm).
Usually some basic construction listed on the workbench of this type will
have:
1. Clamp fastener long side; that serves to bind the length work piece.
2. Clamp fastener wide side, the main function to bind short work piece and
can also function to create a stopper while the long direction.
3. Covered holes on the surface of the table can be used to create a
temporary barrier with a diameter of about 25-30 mm. These holes can be used
to put the 'pillars' of wood as holder a work piece at the time (for
example) the process of refine trim side by machine flatter trim side.
4. Part under table could be placed columns or a hole for the working
equipment storage box.
Workbench is quite easy to make and would be very useful for your wood work.
Choose good wood and stable so that its use be aged longer.
Perusut
This work aids help manual work of a carpenter, especially when dealing with
the problem of making grooves, sawing line and pen hole construction.
What can be done with a Perusut?
The advantages of this tool is at the tip is to use a sharp metal tip to
create a line on the surface of the wood. The tip is used to scratch the
surface of the wood so easily seen and followed by knives and saws cut crab.
Better than pencil because you can only make a thin line that easily erased.
It is very easy to use and high accuracy level. With the line formed by the
end of the nail, guide chisel tip when making a hole pen or cut through the
end of pen.
Function:
1. Making a straight line distance groove or sponning long side log
2. Make line horizontal for a distance / length of pen
3. Make a pen line width of the hole and the hole.
4. Make a straight line toward the saw cut (manual)
Perusut parts
Consists of 4 main sections these are rod size, block boundaries, locker /
lock and the tip of the nail ruler. There are several perusut types that the
nail tip can be removed so easily sharpened. Trunk size there is measurement
scale millimeter, so no longer need to measure before use. And the block
boundary should have the field completely flat and elbows with the rod so
that the size of the desired distance accurately.
How to use:
Set the bar size with a block barrier at the distance position you want.
Tighten the position by rotating locker / lock.
In order to certain, measure the distance outer boundary blocks to the tip
nail ruler using a good gauge.
Put the blocks and attach a wooden barrier on the side and then move the
block (in a state is always patched) along the long side of the wood.
Give little pressure on the tip nail ruler position, so that the movement to
form a line on the surface wood, especially when you use hardwood species.
Author : Draker_Ster is the owner of the website which
specialists in offering indoor and outdoor furniture.
|
|
