About Us
Furniture Categories
Term & Conditions
Contact Us
Article

↑ Grab this Headline Animator

Side List Artificial Board

To close the artificial weakness of the board thickness, we need to close the thick side boards-made with other materials so that water does not easily enter. There are various ways and types of materials that can be done. Closing thick side is known as the 'side list'. The simplest materials use solid wood. We have also had more variety materials such as plastic, rubber or other synthetic materials which will be discussed in separate articles. Installation of wood trim can be a variety of ways and functions. We'll start by looking at the first construction.
Regular Paste
No construction anything except glue. Cross-section of trim wood form is rectangular, square or semi circle depending on the design. But the flat section attached to the side of a thick board made.
Tongue & Flow
List wood as tongue and groove construction is made along the side of a thick board made. This should consider rules to make pen & holes. Good construction is for the broader field of glue and pressed wood trim stronger on the side thick.
Timber Fields
Groove made in list and thick side artificial board. Size, distance and depth must be equal to the placement field (made of plywood 4mm) can be appropriate and balanced.
Halve the field of wood made from 4mm plywood on the right direction. The length of field wood should the same direction of wood fibers on the surface of the triple. This means that the thickest part of plywood in the opposite fibers direction and strong to withstand construction.
Round Pen (wooden dowel)
This construction is usually used to list the width and length that will accelerate the process of layering. Please note length of the round pen is used and the depth of drill holes on the list coating. The hole do not too deep that at the time of cleansing list with drawstring manual or machine sanding, holes do not penetrated. Preparation of wood for list before installation is noteworthy. Give extra thick casing approximately 1-2mm on each surface of the plywood. If you use 18mm thick plywood, wood trim is made with a minimum width of 20mm. It is important to avoid defects due to incorrect trim attachment construction, the hole is not right in the middle, wood or physical disabilities at the time of workmanship errors.

Author : Draker_Ster is the owner of the website which specialists in offering indoor and outdoor furniture.