About Us
Furniture Categories
Term & Conditions
Contact Us
Article

↑ Grab this Headline Animator

Various Types of Eyes Drilling & Functions and Some Configuration Eyes Screwdriver

The drill is the ideal tool to make a neat hole and precision. This can be used on wood, plastic or metal. Many types and sizes of holes that can be created using the drill, but by considering the size of the hole and the type of materials we need to use the right drill. In addition, the material drill types that even also determine the quality of perforation. Harder metal on the drill will be more subtle drilling results.
Twist Bits
Type of drill is the most widely used and quite universal function. Can be used with hand drill machines or drilling machine sits well horizontally and vertically. This drill can be used for making holes in wood, plastic or metal. Normally available in sizes diameter 4 to 12 mm. Better to create a central point using nails or screws to direct this drill when you use a hand drill machine.
Masonry Bits
This designed to make holes in walls, concrete or stone. Used to drill on the hammer setting (beer movement was trembling like a hammer tapping) and at the end of the drill as there are hard metal cutter. Usually available in 4-15mm diameter and drill longer than twist bits (300 - 400mm).
Spur Bits
That was known as the drill wood with a pointed tip drill in the middle and a knife mince at the circumference. Spike in the middle serves to keep the drill straight so that the resulting holes with precision and the same diameter. Diameter sizes are available approximately 6-15mm.
Countersink bits
This drill angled 90° at the ends and working to make holes 45° with the surface of the wood. Usually used when making the hole for the screw heads flush to the surface of the wood. This drill can stand alone and there is also mounted directly to the main drill to make holes screws.
Forster Bit
That is the drill which is used to make holes hinges spoon. It is best if the drilling machine operated by a more stable sitting. Because when using a hand drill will be difficult to control the stability and position of the drill holes produced less quality. The diameter of the available standard hinges spoon diameter, from 15, or 35 mm.
Hole Saw Bits
More precisely we might call saws hole because of the eye drill like saw with a diameter that can be tailored to the needs. Diameter is between 25 - 60mm.

Some Configuration eyes Screwdriver
There are currently 5 types of screw eye with different shape configurations. Although wood furniture generally use only 3 kinds, there will be good if we know all kinds of configuration.
A. Slotted / straight: straight regular with transverse flow. This is used in assembling wood to wood connections.
B. Phillips: In a special design for the screw with a Phillips head.
C. Pozidriv: The shape is almost the same as Phillips head screwdriver but there are additional eight transverse sections dividing the screw head. This screwdriver can not be used to open the screw with a Phillips hole, but otherwise Phillips screwdriver can be used to open the Pozidriv screws.
D. Square: Typically used for construction of a car engine or other motor vehicles.
E. Torx: Shaped like a star and is used for automotive industry, electronic equipment or motors.
The right way & safe to use a screwdriver:
1. Do not use a screwdriver instead as a chisel or a lever nails, you will only damage your working tools.
2. Before you start playing a screwdriver, make sure first that the eyes screwdriver are fully into the screw hole in the head.
3. Do not open the screws or tools that are still connected to electricity. Not all screwdrivers despite having a rubber grip to prevent electrical current very well.
4. The screwdriver should be placed on desk or bag of equipment to avoid accidents caused by slips (screwdriver on the floor).
5. Always position the screwdriver rod parallel to the screws for easy installation of screws.
6. Use your left fingers holding the head screwdriver to pressure the screw drive maximum and the right finger to rotate the screwdriver with the pressure. Be careful not to finger under the head screwdriver.
7. Do not use your left hand to hold the screws. Better to use a wooden or rubber hammer to insert screws in the beginning.

Author : Draker_Ster is the owner of the website which specialists in offering indoor and outdoor furniture.