About Us
Furniture Categories
Term & Conditions
Contact Us
Article

↑ Grab this Headline Animator

Wood Bending and Layer Glued Panel

When designers want a chair with a curved component, especially in the legs or the spokes of the back, often the production can not meet those needs. The way out of this case is often to use a wide board then drawn in accordance with the components of the curve. Yield of wood raw material becomes smaller as more parts of discarded boards can not be used for other components. Moreover, if operator machine is not good at selecting quality materials will affect the quality & strength product. Technology solutions that currently there is supposed to make it no longer a problem. Some people are just less mean wood bending technology. If we need a curved component can be made with a solid wood that curved or some organized solid wood curved.
Wood Bending
Most allow for wood with a limited thickness. Using the method of bending wood is variety. In principle, bending wood is produced from solid wood that is straight and in the pressed so as to bend in accordance with the desired radius. The process of preparation in the area components is no different with other components of the straight. Components are heated, can be boiled or electrical so that the wood becomes more pliable to be easily formed. This component is placed on a machine / press tool which has a field with a certain radius and pressing done for some time. Time pressure depends on the thickness of the wood. It should be noted when selecting materials for the wood components of this bending. Choosing well the wood fibers are straight and no knots. If there is a knot, as far as the diameter and knot quality of wood (live knot or dead knot wood) is not too large compared to the wide component, effect on quality of bending wood is not too large.
Layer Glued Panel
The principle of making is similar to the process a coating of artificial board multiplex. If the curved sheet will be used for such holder seats, veneer arranged crosswise in order to the resilience side is better. The difference is in the process of suppression has been provided surface in accordance with the design of the arch. Panel size is limited. This process includes more expensive than wood bending. If the design requires the foot arches more extreme, the development of layer is direction of upper, middle and bottom layers. In terms of costs and processes, Glued Panel Layer more expensive and more complicated. But in terms of design aesthetics would be very satisfying. Layer glued panel is not wood bending. More precisely, if we call the curved laminated wood.
So when you hear the term wood bending, you better be careful in terms of explanation and the method performed. Wood bending will always be made from a curved solid wood.

Author : Draker_Ster is the owner of the website which specialists in offering indoor and outdoor furniture.