About Us
Furniture Categories
Term & Conditions
Contact Us
Article

↑ Grab this Headline Animator

Wood Laminate It More Powerful

Often, people hesitate when it will make a laminate on solid wood. The doubt arises because the solid wood is still proven a strong material and durable. Several factors, especially in the lamination process have an important role in the outcome and the strength of these laminates. We need to know first the type of wood and the density of the solid wood. Wood that has a high density usually has pores that have the strong tie with each other. Therefore, the glue that binds one to the other components should also be strong enough. While wood with low density tend to have low power divide. Glue wood good quality for granted have a good bunch power also when applied correctly. Glue wood has gone through several tests such power by soaking the laminate for 24 hours in the water or can a certain burden on the laminate. Some test results indicate that the line remains intact laminate, but instead split the wood was not able to resist the pull. Laminate is basically has a power tie is better than the solid wood itself along glue process if done correctly.

Checking on Laminates:
1. Wood will be laminated must dry (MC has a good level). Aiming to glue wood can really penetrate well into the wood.
2. Do not do laminate on different types of wood to get the best results.
3. Do not do laminate on the type of wood of different hardness is too far; hard wood with soft wood; wooden porch with a wood pig.
4. Where possible, the laminated wood should have an equal width or thick. This arrangement can help the wood from the risk curve.
5. Laminate surface should be smooth and flat. This will help the alignment area of the glue and the bond between components.
6. The viscosity of glue wood to the standards recommended by the manufacturer of glue.
7. The pressing very important to laminate. Greater push given to help the 'penetration' into the glue wood is better so that the amount of glue will penetrate more.
8. Glue drying time when pressing is also very important. For normal glue, pressing time to be around 3-4 hours. After that could be placed without the high pressure for 24 hours before they enter to the next laminating process.
If you are able to effectively carry out these controls, the option to create a laminate will be easier. Technically and economically, wood laminating better than solid wood (not applicable to certain types of wood). Another thing that would have to be your next consideration is the aesthetic issue, among others that the line laminate will damage the aesthetic value of your product or not?

Author : Draker_Ster is the owner of the website which specialists in offering indoor and outdoor furniture.